Maintenance and Tips

Tightening the hoops on your Nordic bath

After summer, the wood of your Nordic bath may have dried out and its hoops may have loosened. Discover the order in which to tighten them, with a simple 19 mm wrench and a two-step trick.

Storvatt Photo: stainless steel coupler with brass nut on Red Cedar Nordic bath band
Difficulty level
Easy
Estimated time
2 min

After summer, it is advisable to tighten the bands of your Nordic bath: the heat may have dried out the wood, and the bands may have become too loose. The tightening is done on the nuts located at the back of the structure, with a 19 mm wrench, starting with the bottom band. Here is the step-by-step method.

Why tighten the bands of the Nordic bath after summer

The bands keep the wooden boards of your Nordic bath tightly pressed against each other.

During summer, the heat may have dried out the wood. However, wood that dries shrinks slightly: this is the natural behavior of a living material like Red Cedar. The bands can then become too loose. Tightening after summer restores proper tension to them.

The right tools

A 19 mm wrench is sufficient to perform the tightening under good conditions.

How to tighten the bands of your Nordic bath

The nuts are located at the back of the structure. The tightening order matters: start with the bottom band, continue with the middle one, and only touch the last one if necessary. Always tighten the nuts one after the other, never two at the same time.

How to Adjust Sauna Hoops

  1. Locate the nuts under the structure

    The straps are tightened using the nuts located at the back of the structure.

    3D Diagram Storvatt: Overview of a Red Cedar Nordic bath with fireplace, blue straps and tightening arrows
  2. Tighten the bottom strapping

    Start with the bottom strapping. Tighten until you hear a significant creaking sound from the wood.

    3D diagram Storvatt: tightening the strapping at the bottom of a Nordic bath using a wrench, orange rotation arrow

    Tip: Tap the strapping all around the tub If there are two of you, one tightens the bottom strapping while the other taps the strapping all around the tub.

  3. Tighten the middle strapping

    Then tighten the middle strapping if needed, until it contacts the wood. Be careful not to over-tighten.

    3D Diagram Storvatt: tightening the strap in the middle of a Nordic bath using a wrench, orange rotation arrow
  4. Check the top strap

    Do not tighten the last strap if it is already holding. Otherwise, tighten it very lightly.

    3D Diagram Storvatt: tightening the strapping at the top of a Nordic bath using a wrench, orange rotation arrow

Do you have questions about maintaining your sauna?

Our teams answer your questions about tightening the barrel bands and maintaining your wooden sauna.

FAQ

When should you tighten the bands on a Nordic bath?

The key time is the end of summer, when the heat may have dried out the wood, or as soon as you notice a leak in the tub. For effective tightening, empty the tub and let the wood dry for 1 to 3 weeks, then tighten. If the tub has remained empty, tighten the bands before filling it.

Can you tighten the bands of your Nordic bath alone?

Yes, the procedure can be done alone. With two people, one tightens the bottom band while the other taps the band all around the bath.

Do you need a tool to tighten the straps?

A 19 mm wrench is necessary.

Should you drain your hot tub during vacation?

No, especially in summer: leave the tub filled with water during your absence. If you still wish to drain it, keep at least a good amount of water at the bottom.

Read also

All posts