Maintenance and Tips

Bromine Treatment of a Dual-Filter Spa

Dual-filter spa: where and how to perform bromine treatment Introduction: Your spa is equipped with a technical unit with two filters? Bromine treatment is performed only in the first one. Here's how to open the filter, refill the brominator, and adjust the diffusion.

Groupe Technique Double Filtre Article
Difficulty level
Medium
Estimated time
3 min

On a spa equipped with a technical unit with two filters, bromine treatment is done only in the first filter; the second operates without tablets. For the rest, the procedure is identical to that of a single filter system. Here's how to open the filter, use the brominator and adjust bromine diffusion.

Spa bromine treatment: only in the first filter

Your wooden spa is equipped with a technical unit with two filters. Bromine treatment is done only in the first filter. The second operates without bromine tablets: no need to add any.

To identify the first filter: [DATA TO CONFIRM: identifier for the first filter].

For the rest, the procedure is identical to that of a single filter system [LINK TO CONFIRM: bromine treatment sheet, simple filter].

The brominator, a three-piece cover

The cover of the first filter serves as a brominator. It consists of three parts, including a removable section. By turning it, you access two functions:

  • refill bromine tablets;

  • adjust bromine diffusion in the water.

How to perform bromine treatment in the first filter

  1. Locate the first filter

    The first filter is the one located closest to the pump in the circuit.

    Premier Filtre (custom)
  2. Unscrew the filter collar

    On the first filter, unscrew the collar located above the cover.

    Devisser Collerette
  3. Open the lid

    Unscrew the drain plug, then pull the handle using a lever motion, as if opening the lid.

    Decapsulez Couvercle

    Tip: In place, the lid creates a suction effect; use back-and-forth motions rather than pulling vertically.

  4. Refill the bromine tablets

    Turn the removable part of the brominator to access the bromine tablet refill. Fill the brominator.

    Brominateur
  5. Adjust the bromine dispersion

    Turn the removable part to adjust the dispersion. Storvatt recommends closing the dispenser halfway.

    Intensite Diffusion Brome
  6. Refermez le filtre

    Replacez le couvercle sur le filtre, puis revissez le collier.

    Devisser Collerette
  7. Flush and restart the system

    Open the valves, then flush the system: let the water out through the drain plug before closing it again. Then restart the system by restoring power or exiting the "HOLD" mode.

    Dévissez La Purge D'air (custom)

Do you have questions about maintaining your spa?

Our teams answer your questions about tightening the bands and maintaining your wooden sauna.

FAQ

Should you put bromine in both spa filters?

On a technical unit with two filters, treatment with bromine can be done only in the first filter. The second operates without bromine tablets.

How to refill bromine in the brominator?

Turn the removable part of the brominator to access the refill, then simply fill the brominator with bromine tablets.

How to adjust bromine distribution in a spa?

The distribution is adjusted directly on the brominator by turning its removable part. Storvatt recommends closing the diffuser halfway. The opening can vary depending on the spa's usage and size: regularly check your bromine level and adjust the setting accordingly.

I can't open my spa filter cover?

When in place, the cover creates suction. After unscrewing the collar, make back-and-forth movements and uncap it rather than pulling it vertically.

Read also

All posts