Maintenance and Tips

Sauna door latch: how to adjust it yourself

Is the wood of your sauna warping and the door not closing properly? Adjusting the sauna door latch will help you regain a tight closure. Here's how to do it, by hand or by removing its plate.

Storvatt: aluminum strapping tensioner with brass nuts fixed under the wall of a wooden sauna
Difficulty level
Medium
Estimated time
5 min

Why the sauna door latch becomes misaligned

The wood in your sauna works and moves. This is natural for all natural wood, like the Red Cedar used to manufacture Storvatt saunas: it reacts to variations in temperature and humidity.

The door can then move slightly, and the latch is no longer set in the correct position. Two situations can occur:

  • The door closes with difficulty: the latch protrudes too much.

  • The door no longer closes: the latch does not protrude enough.

In both cases, a simple adjustment of the latch allows you to restore a clean closure, regardless of your wooden sauna model.

How to adjust the sauna door latch by hand

The ball latch is located on the edge of the door. In most cases, it can be adjusted directly by hand.

How to Adjust the Sauna Door Latch

  1. Open the sauna door

    The latch is located on the edge of the door, in the middle.

    3D Diagram Storvatt: door latch on plate, next to the chrome handle, overall view of the sauna door
  2. Tighten or loosen the latch

    If the closure is difficult, tighten the latch: it retracts into the door. If the door no longer closes, loosen it: it protrudes more.

    3D diagram Storvatt: rotation of the threaded latch knob on the door plate, orange rotation arrow
  3. Test the closure

    Close the door again to check the adjustment. Adjust again if necessary.

    3D Storvatt diagram: front view of a barrel sauna door, orange arrows indicating horizontal sliding

Remove the plate if the latch resists

  1. Unscrew the two screws from the plate

    Unscrew the two screws that hold the latch plate on the edge of the door.

    3D diagram Storvatt: unscrewing the two screws of the door latch plate, orange rotation arrows
  2. Adjust the latch on the plate

    Remove the plate and the ball latch screwed onto it. Turn the plate on the latch's threaded section to adjust it: the latch will retract or extend further once reassembled.

    3D Diagram Storvatt: rotation of a disk-shaped door latch on its mounting plate, orange rotation arrow
  3. Slide the plate back

    Reinstall the plate in its slot and tighten the two screws. Then test the door closure.

    3D diagram Storvatt: unscrewing the two screws of the door latch plate, orange rotation arrows
  4. Test the closure

    Close the door again to verify the adjustment. Adjust again if necessary.

    3D Storvatt diagram: front view of a barrel sauna door, orange arrows indicating horizontal sliding

Need assistance with your sauna

Experiencing

FAQ

Why does sauna wood move and shift?

Wood is a natural material that reacts to variations in temperature and humidity. In a sauna, these variations are significant between sessions. The wood therefore shifts slightly, which can alter the adjustment of the door and its latch.

Do you need a tool to adjust the latch on a sauna door?

The latch can be screwed and unscrewed by hand. If the fastening is too tight, a screwdriver adapted to the two screws on the plate allows you to remove it to adjust the latch more easily.

Do you need a tool to tighten the strapping?

A

Can the door latch become misaligned again?

Yes, because the sauna wood continues to shift throughout the seasons. You can readjust the latch as often as necessary, following the same method.

What to do if the sauna door still closes poorly after adjustment?

Contact our teams by specifying your sauna model. They will help you identify the source of the problem and the appropriate solution.

Read also

All posts